ศูนย์จำหน่าย ติดตั้งเครื่องเสียงติดรถยนต์ focal,ลำโพง focal caraudio,เครื่องเสียง focal,เครื่องเสียงรถยนต์ focal,ตัวแทนจำหน่าย focal,ร้านจำหน่ายเครื่องเสียง focal,โฟคอล,เครื่องเสียง hi-end,ร้านเครื่องเสียง focal,ร้านติดตั้ง focal,focal,แผนที่ติดต่อ focal,เบอร์โทร focal,สั่งซื้อ focal,ราคา focal,ลำโพง focal,power amp focal,bassbox focal,subwoofer focal,speaker focal,focal thailand,focal ประเทศไทย,ลำโพง focal,ลำโพงแยกชิ้น focal,ลำโพง 3 ทาง focal,ราคาเครื่องเสียง Focal,ราคาลำโพง Focal,ราคาลำโพงโฟคอล |
|
ศูนย์จำหน่ายเครื่องเสียงติดรถยนต์ Hertz |
Hertz Speaker |
|
|
|
Hertz Dieci DSK 165
With a DIECI SYSTEM, you can easily build very high quality audio systems that are install-friendly. The woofers use the proprietary “V” Cone membrane, ensuring the best performance.
The DT 16 neodymium tweeter provides wide, detailed high frequency response. The in-line hi/lo pass passive crossovers, and the rich accessory kit provided with these systems increase the installation possibilities.
A two way component that really will make a difference to your enjoyment of music in your car.
The Dieci Component speakers combine a solid woofer with a very good quality tweeter, the result is a highly musical speaker perfect for those factory system upgrades.
Size: woofer 165mm, tweeter 15mm
Power handling: 160 watts peak, 80 watts RMS
Inpedance: 4 ohm
Frequency Response Hz: 50-21k
Component: 2 way Component
Size: woofer 165mm, tweeter 15mm
Power handling: 160 watts peak, 80 watts RMS
Inpedance: 4 ohm
Frequency Response Hz: 50-21k
Sensitivity: 93dB
Outer diameter: 166mm
Mounting hole diameter: 142mm
Magnet size: 80mm
Total depth: 68mm
Mounting depth: 61mm
Magnet: High density flux ferrite
Cone: Water repellent pressed paper
Crossover: 3.5kHz-6/12dB Oct
More
|
Energy systems are the ideal solution to install a very good quality system in factory locations. Given with complete mounting hardware, these systems synthesize and fully represent Energy line sound philosophy. Listening to pure energy.
Woofers: water-repellent treated paper cones, phase plugs new profile, high
density rubber surround, curve memory Nomex? spider, DIN size baskets protected
by abrasionproof paint, very big magnet with vented hole, silver-plated lead wires.
Tweeters: Compact size, neodymium magnet, dome made of Alumax?, silk
surround, ultra-light ferrofluid-cooled mobile voice coil, revolving support and
accessories for factory location and flush mounting.
Crossover included
Grilles included
Technical Specifications
Component: 2 way system: EV 165, HT 18 Factory provide separate crossover
3,5kHz-6/12 dB.
Size: 165 mm (6”1/2) Woofer,
20 mm (3/4”) Tweeter
Power Handling(Watt): 200W Peak Power, 100W Continuous Program Power
Sensitivity: 91 dB/SPL
Impedance: 4?
Frequency Range: 60 Hz - 23kH
More
|
Hertz Hsk 163.4
Three-way system deriving from the combination of HV 165L woofer, HL 70 full-range and HT 25 tweeter. The crossover, especially designed for it, has high quality components and provides optimised crossover points.
The emission level can be adjusted according to personal taste and the vehicles acoustical signature, ensuring the best results in whatever car compartments. Two speakers with outstanding energy in minimum size, thanks to the Neodymium magnet; a compact tweeter and a rich set of accessories for factory location: HSK 163 is very versatile and can meet various needs.
|
|
|
|
Hertz Hsk 165
Completeness and versatility, technology and performances: all you need to easily build extraordinary systems. The Hi-Energy System line includes a wide range of complete kits, consisting in the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover.
Provided with the tweeter mounting hardware, with grilles and an easy owner’s manual, Hi-Energy systems achieve the best results in every car compartment.
More
|
|
|
|
Hertz Amplifier |
|
|
|
Hertz HE 1 D
Features
-Output Power (RMS)
-200W x 1 @4-ohm
-320W x 1 @2-ohm
-450W x 1 @1-ohm
-Low Pass Filter: 40 - 250Hz @24dB/Oct (L+R)
-Subsonic: Hi-pass / 15 - 40Hz @24dB/Oct
-Output Phase Control: 0/180 Degress
-Bass Boost: 0-12dB @50Hz
-Bandwith (-3 dB): 15 - 250Hz
-S/N Ratio (A weighted @1V): 100dBA
-Damping Factor (100Hz @4-ohm) >150
-Pre-In sensitivity: 0.3-5Volts
-Pre-In impedence: 15 kohms
-Speaker-In sensitivity: 1.4-24Volts
-Speaker-in impendence@ 470 Ohms
-Load impendence 1 Ch: 4-1hms
-Power supply voltage: 11 - 15Volts
-Idling current: 0.8A
-Idling current when off: 0.04mA
-Consumption @1ohm, 14.4VDC: 23A
-Remote In: 6-15 VDC - 1mA
-Remote Out: 12 VDC - 50mA
-Automatic Turn On/Off with speaker in
-Fuse: 2x30A
-Dimensions (mm): 266 x 389 x 63.5
More
|
Hertz HE 2
Features |
HE DESIGN PHILOSOPHY After the design of EP amplifiers, the Elettromedia R&D team focused on a very hard goal: to provide the traditional Hertz sound and power through an amplifier at a more affordable price while maintaining the reliability and performance standards that made the Hertz EP series such a success. |
Amp Type |
2 Channel |
Power Output |
400-500 |
Amp Features |
Speaker Input terminals |
Load Imedence |
2 Ohm Stereo, 4 Ohm |
More
|
Hertz HE 4
The Hertz HE4 is a four-channel, 800W (Max) amplifier that can be bridged in dual mono as well for utmost flexibility; it is the ideal choice to upgrade your factory system: pre-amplified inputs as well as hi-level inputs offer the possibility for the HE 4 to be interfaced with any head units, including factory OEM systems. Real 12dB/Oct. continuously adjustable (40 to 400Hz) active crossover with Lo-Pass/Hi-Pass or Full Range settings on each pair of channels ensures the best acoustic performance of your car audio system especially in front plus subwoofer application. The advanced electronics and the optimized cooling system ensure the HE 4 to provide high power, even under difficult conditions.
- 800W Max Power
- 70W x 4 RMS (4 ohm)
- 100W x 4 RMS (2 ohm)
- 3 channel mode: 70W x 2 (4ohm) + 200W x 1 (4ohm)
- 100W x 2 (2ohm) + 200W x 1 (4ohm)
- 800W Max Power
- 70W x 4 RMS (4 ohm)
- 100W x 4 RMS (2 ohm)
- 3 channel mode: 70W x 2 (4ohm) + 200W x 1 (4ohm)
- 100W x 2 (2ohm) + 200W x 1 (4ohm)
- Bandwith (-3 dB): 7 - 45Hz
- S/N Ratio (A weighted @1V): 104dBA
- Damping Factor (100Hz @4-ohm) >150
- Pre-In sensitivity: 0.3-24Volts
- Pre-In impedence: 15 k ohms
- Speaker-In sensitivity: 1.4-24Volts
- Speaker-in impendence@ 470 Ohms
- Power supply voltage: 11 - 15Volts
- Idling current: 1A
- Idling current when off: 0.02mA
- Consumption @2ohm, 14.4VDC: 25A
- Remote In: 6-15 VDC - 1mA
- Remote Out: 12 VDC - 15mA
- Automatic Turn On/Off with speaker in
- Fuse: 2x20A
- Dimensions (mm): 267 x 393 x 63.5
More
|
|
|
|
|